need help? 877-360-6777
Home / Products / Dock Lifts / Truck Leveler - Shallow Pit Mount / TL-1840SPM
Warranty

// TL-1840SPM

Autoquip’s Shallow Pit Mounted Truck Leveler can be modified to include accessory options to meet the demands of your outdoor application.  We have options to improve load transfer, security features, weather and debris protection.

Autoquip has the largest selection of options in the industry and if you don’t find it here, contact one of our experienced sales managers for help in finding the right option for your project requirement.

Platform

Bevel Toe Guard

Lifting Eyes -- eye bolts not included

Wheel Curbs

Full Length Covered Wheel Locator

Cylinder Towers -- mounted and welded (surface mounted model only)

Cylinder Manifold Assembly (surface mounted model only)

Shallow Pit - 5" -- ramp is removed and clevis attachment is supplied (surface mounted model only)

Rear Accordion Skirt Assembly For Truck Leveler

Power Unit Options

Connection Hose

Remote Power Units

Wall Mounting Brackets

Cover for Remote Power Unit

Dipstick

Oil Immersion Heater (remote steel tank power units)

Sight Gauge (remote steel tank power units)

No Power Unit & No Controls

Electrical Options

Upper/Lower Travel Limit Switch -- shipped loose

Upper/Lower Travel Limit Switch -- mounted and wired

Key Operated On/Off Security Lockout Switch (NEMA-12)

115 Volt Controls

N-12 Enclosure -- mounted and prewired to power unit (110V & 24V control)

Key Operated Up/Down Switch (NEMA-12)

Upper/Lower Travel Limit Switch -- mounted not wired

115 Volt AC Down Solenoid Coil -- mounted only (controls not supplied)

24 Volt DC Down Solenoid Coil -- mounted only (controls not supplied)

Up/Down Push Button Station -- wall mounted (NEMA 4)

Up/Down Push Button Station -- pedestal mounted (NEMA 4)

Hook for Pushbutton

Weatherproof Push Button -- 20' coil cord

Audible Signal -- shipped loose

Audible Signal with Volume Adjust -- shipped loose

Prewired Audible Signal -- standard or adjustable (mounted in main control enclosure)

Flashing Red Light -- shipped loose

115 Volt Controls -- mounted & prewired (in lieu of standard 24 VAC)

No Controls

Paint Options

Standard Autoquip Colors:  Black (RAL 9005), Brown (RAL 8028), Machinery Grey (RAL 7005), Blue (RAL 5000).

Standard Colors - no additional cost. 

Refer to standard RAL paint # colors chart

Special Paint Options:

Match Color -- customer's color can be matched with paint chip/RAL paint #, or with an Autoquip equivalent paint.  

Safety Colors include: Orange (RAL 2009) or Yellow (RAL 1023).  

Additional cost associated for these special paint options. 

Refer to standard RAL paint # colors chart.

Epoxy Paint -- customer's color can be matched with paint chip/RAL paint #, or with an Autoquip equivalent paint (2 part epoxy, sand blasting of unit recommended)

Steel-it -- stainless steel filled urethane primer and finish coating (MCU type IV for incidental food contact)

Primer Only

Tile Clad Epoxy -- sand blasting of unit required

With the largest selection of lifts, Autoquip can provide you with the lift you need. To request a quotation please click here.

Terms of Use    Privacy Statement    Site Map

© Autoquip Corporation. All rights reserved. If you have a special requirement, contact Autoquip at sales@autoquip.com or call toll-free 877-360-6777.