need help? 877-360-6777
Home / Products / High Travel Lifts / Mechanical 4 Post VRC / FL4M-8
Warranty

// FL4M-8

Our Mechanical 4 Post VRC’s can be customized to include accessory options to meet the specifics of your application.  We offer options to complete your VRC design such as gates and enclosures, safety sensors, and carriage side guards to name just a few.  
Autoquip has the largest selection of options in the industry and if you don’t find it here, contact one of our experienced sales managers for help in finding the right option for your project requirement. 

Carriage

Larger Platform Sizes (refer to model specifications for minimum-maximum allowable sizes)

Handrails (for non-operating sides)

48" High Expanded Metal or Sheet Metal Side Guards (non-operating sides with snap chains across operating ends)

84" High Expanded Metal or Sheet Metal Side Guards (non-operating sides with snap chains across operating ends)

Four-way Tread Plate Approach Ramp

Spliced Carriage

Carriage Load Height -- addition or reduction from 7’ standard (2-post models)

Stainless Steel Skin -- bolted or welded to carbon steel platform

Stainless Steel Deck -- 304 SS 1/4" sheet over standard carbon steel deck

Conveyor -- gravity or powered, supplied and mounted

Four-Way Tread Plate

Factory Assembled Carriage

Expanded Metal Carriage Roof Enclosure

Handrail Kickplate -- larger than 4" standard

Non Slip -- black silica sand finish

Power Unit Options

Automatic Chain Oiler

Reliance Motor

Electrical Options

Key Operated On/Off Security Lockout Switch (NEMA-12)

Extra Push Button Station -- 3 Button Up/Down, E-Stop (NEMA 4)

Key Operated Up/Down Switch (NEMA-12)

Audible Signal -- shipped loose

Audible Signal with Volume Adjust -- shipped loose

Prewired Audible Signal -- standard or adjustable (mounted in main control enclosure)

Flashing Red Light -- shipped loose

No Controls

Keylock

Lift Present Light

Limit Switch -- shipped loose for field mounting

NEMA 12 Disconnect -- mounted in control enclosure

Drop Cord Assembly

Audible Signal or Light (per station)

Car Arrival Buzzer (per station)

Gates & Enclosures

Single Swing Gates

Biparting Swing Gates

Single Panel Vertical Acting Gates

Bi Panel Vertical Acting Gates

Horizontal Sliding Gates

Back Stop Assembly Kits

Panels (standard 96" high)

Interlocks

Mast

Mast Beams (factory spliced)

Service Work Platform -- for mechanical models with handrails and guards over rotating drive components

Paint Options

Standard Autoquip Colors:  Black (RAL 9005), Brown (RAL 8028), Machinery Grey (RAL 7005), Blue (RAL 5000).

Standard Colors - no additional cost. 

Refer to standard RAL paint # colors chart

Special Paint Options:

Match Color -- customer's color can be matched with paint chip/RAL paint #, or with an Autoquip equivalent paint.  

Safety Colors include: Orange (RAL 2009) or Yellow (RAL 1023).  

Additional cost associated for these special paint options. 

Refer to standard RAL paint # colors chart.

Epoxy Paint -- customer's color can be matched with paint chip/RAL paint #, or with an Autoquip equivalent paint (2 part epoxy, sand blasting of unit recommended)

Steel-it -- stainless steel filled urethane primer and finish coating (MCU type IV for incidental food contact)

Primer Only

Tile Clad Epoxy -- sand blasting of unit required

With the largest selection of lifts, Autoquip can provide you with the lift you need. To request a quotation please click here.

Terms of Use    Privacy Statement    Site Map

© Autoquip Corporation. All rights reserved. If you have a special requirement, contact Autoquip at sales@autoquip.com or call toll-free 877-360-6777.