need help? 877-360-6777
Home / Products / Scissor Lift Tables / PLTC Dock Lift / PLTC-6080A
Warranty

// PLTC-6080A

Autoquip’s PLTC Dock Lift can be modified to include accessory options to meet the demands of your indoor or outdoor application.  We have options to improve load transfer, weather protection and added security features.  

Autoquip has the largest selection of options in the industry and if you don’t find it here, contact one of our experienced sales managers for help in finding the right option for your project requirement.

Platform

Larger Platform Sizes (refer to model specifications for minimum-maximum allowable sizes)

Throw Over Bridge and Approach Ramps

Handrails -- removable & permanent

Accordion Skirts -- standard & special configurations

Smooth Plate -- in place of non-skid

Added Rollover Capacity

Shuttle Decks

Lifting Eyes -- eye bolts not included

Night Locks

Fully Automatic Mechanical Wheel Chock

Power Unit Options

Connection Hose

Remote Power Units

Installation Package -- includes 5 gallons of oil and 20 ft. of hose

Wall Mounting Brackets

Cover for Remote Power Unit

Internal 5HP Super Torque Intermittent Duty Motor (230/460V/3PH-60CY,TENV)

Hand Operated Up/Down Control

Water Glycol -- non-flammable oil with viton seals in lift cylinders

Food Grade Oil

Biodegradable Oil

Dipstick

Manual Valve to Shoot Off Pressure Line (remote power units only)

Oil Immersion Heater (remote steel tank power units)

Sight Gauge (remote steel tank power units)

No Power Unit & No Controls

Electrical Options

Upper/Lower Travel Limit Switch -- shipped loose

Upper/Lower Travel Limit Switch -- mounted and wired

Key Operated On/Off Security Lockout Switch (NEMA-12)

115 Volt Controls

N-12 Enclosure -- mounted and prewired to power unit (110V & 24V control)

Key Operated Up/Down Switch (NEMA-12)

Upper/Lower Travel Limit Switch -- mounted not wired

115 Volt AC Down Solenoid Coil -- mounted only (controls not supplied)

24 Volt DC Down Solenoid Coil -- mounted only (controls not supplied)

Hook for Pushbutton

Weatherproof Push Button -- 20' coil cord

Audible Signal -- shipped loose

Audible Signal with Volume Adjust -- shipped loose

Prewired Audible Signal -- standard or adjustable (mounted in main control enclosure)

Flashing Red Light -- shipped loose

Twist Lock - male & female (for control only)

115 Volt Controls -- mounted & prewired (in lieu of standard 24 VAC)

No Controls

Baseframe Accessories

Built Up Baseframe -- to achieve specified lowered height up to 24" in addition to full standard travel

Paint Options

Standard Autoquip Colors:  Black (RAL 9005), Brown (RAL 8028), Machinery Grey (RAL 7005), Blue (RAL 5000).

Standard Colors - no additional cost. 

Refer to standard RAL paint # colors chart

Special Paint Options:

Match Color -- customer's color can be matched with paint chip/RAL paint #, or with an Autoquip equivalent paint.  

Safety Colors include: Orange (RAL 2009) or Yellow (RAL 1023).  

Additional cost associated for these special paint options. 

Refer to standard RAL paint # colors chart.

Epoxy Paint -- customer's color can be matched with paint chip/RAL paint #, or with an Autoquip equivalent paint (2 part epoxy, sand blasting of unit recommended)

Steel-it -- stainless steel filled urethane primer and finish coating (MCU type IV for incidental food contact)

Primer Only

Tile Clad Epoxy -- sand blasting of unit required

Cold Galvanizing -- painted steel with a suspension of zinc particles in an organic solvent, so that a zinc coating remains following evaporation of the solvent

With the largest selection of lifts, Autoquip can provide you with the lift you need. To request a quotation please click here.

Terms of Use    Privacy Statement    Site Map

© Autoquip Corporation. All rights reserved. If you have a special requirement, contact Autoquip at sales@autoquip.com or call toll-free 877-360-6777.