Autoquip Pit Mounted Dock Scissors Lifts are the most popular type of powered loading dock equipment providing the most economical, dependable, and versatile method of moving a light to medium wheeled or palletized load on to or from delivery trucks of various heights onto or from your dock. Hydraulic scissors dock lifts are normally installed outdoors, on or in front of a dock or loading area. The recessed pit installation, which is flush with the grade, allows loading or unloading at grade with wheeled carts, etc., and permits vehicular cross traffic in alleyways or in tight turning areas when the lift is not in use. Each hydraulic scissors dock lift is designed and manufactured to meet the industry safety requirements set forth in ANSI MH29.1.

The TSL Pit Mounted Dock Lift family is a robust and versatile family of heavy- duty hydraulic scissors dock lifts. This family of heavy capacity scissors lifts can be used in conjunction with dock systems, or alone – such as loading & unloading trucks, moving fork trucks or other wheeled loads between levels, and large part assembly or disassembly – to improve work flow at the dock or inside the plant. The TSL Dock Scissors Lifts provide travels to 60", capacities to 20,000 lbs., and are equipped with handrails, hinged bridge, and remotely located hydraulic power unit. Because these heavy-duty dock scissors lifts are capable of high end and side load capacities, typical applications would include: air cargo containers, paper rolls, steel coils, and fork trucks.

The PLD Dock Scissors Lift family is a stationary, low to medium capacity surface mounted hydraulic scissors lifts, which have a low profile of 6" to 6-1/2". These scissors lifts are designed especially for situations where no dock exists. Because the PLD Surface Mount Dock Lifts are not installed in a pit, these hydraulic scissors lifts can be relocated easily should dock locations or requirements change. The PLD Dock Scissors Lifts provide through-loading only (no 90 degree load patterns) in travels to 55-1/2", capacities to 5,000 lbs., and are equipped with handrails, (1) hinged bridge per end, and self-contained or remotely located hydraulic power unit.

The PDQ Dock Scissors Lift series of hydraulic scissors lifts are portable, medium capacity surface mounted lifts with a very low 4-1/2" profile. The PDQ Dock Scissors Lifts are rated to 6,000 lb. capacity and are designed for high volume, through-loading applications especially in areas where no dock exists. The integrated approach ramp allows the rolling of loads to or from ground level, and a throw-over bridge on the opposite end of the platform helps to transition the load to or from an elevated loading surface such as a dock or truck. These PDQ lifts come with a dolly handle, which is used to move an empty lift manually to any location in the dock or parking lot area. Quick-disconnect, single-phase electrical connections allow the hydraulic power unit to be plugged into any convenient receptacle with adequate service rating.

The CMD Dock Scissors Lift family of hydraulic dock lifts are portable, low capacity surface mounted lift with a very low 4-1/2" profile. CMD Dock Scissors Lifts have three open platform sides, which are designed to be configured to mount any combination and orientation of approach ramp, throw-over bridge, or handrail. These CMD lifts come with a dolly handle, which is used to move an empty lift manually to any location in the dock or parking lot area. Quick-disconnect, single-phase electrical connections allow the hydraulic power unit to be plugged into any convenient receptacle with adequate service rating. Typical load transfer applications for these 3,000 & 4,000 lb. capacity dock lifts include; laundry carts, wheeled postal carts, carts serving retail outlets, pallet jacks and hand dollies.

Autoquip Surface Mounted Truck Levelers provide a superior solution to getting delivery vehicles loaded and unloaded quicker and safer by bringing the truck bed closer to or equal to the dock level. By leveling the truck or trailer to the dock, there is little incline for the wheeled load to overcome. The Surface Mounted hydraulic Truck Leveler is suited for above ground installation having a low profile height of 5". Because the Surface Mounted Truck Levelers are not installed in a pit, these hydraulic lifts can be relocated easily and inexpensively should dock locations or requirements change. Travel of the hydraulic Surface Mounted Truck Levelers is 30", with lifting capacities to 60,000 pounds. The Surface Mounted Truck Leveler is normally installed outdoors, in front of a dock or loading area, and is equipped with an approach ramp.

Autoquip Pit Mounted Truck Levelers provide a superior solution to getting delivery vehicles loaded and unloaded quicker and safer by bringing the truck bed closer to or equal to the dock level. By leveling the truck or trailer to the dock, there is little incline for the wheeled load to overcome. The Pit Mounted version of the hydraulic Truck Leveler is for recessed installation, allowing the platform to travel above or below the grade to accommodate a wider variety of truck bed heights. Travel of the hydraulic Pit Mounted Truck Levelers can be configured in many above and below grade combinations totaling 30", with lifting capacities to 60,000 pounds. The Pit Mounted Truck Leveler is normally installed outdoors, in front of a dock or loading area, and permits vehicular cross traffic in alleyways or in tight turning areas when the lift is not in use.

The Ground Level Truck Levelers provide a superior solution to getting delivery vehicles loaded and unloaded quicker and safer by bringing the truck bed closer to or equal to the dock level. By leveling the truck or trailer to the dock, there is little incline for the wheeled load to overcome. The Ground Level version of the hydraulic Truck Leveler is an extremely low profile surface mounted lift with only 2-1/4" of deck height in order to level the widest variety of truck bed heights possible. Because the Ground Level Truck Levelers are not installed in a pit, these hydraulic lifts can be relocated easily and inexpensively should dock locations or requirements change. Travel of the Autoquip Ground Level Truck levelers is 30", with lifting capacities to 60,000 pounds and is equipped with a approach ramp.

Autoquip Single Leaf Bascule Bridges are hydraulically operated and can be raised to full vertical position when not in use, eliminating the possibility of interference with rail or other traffic. Single Leaf Bascule Bridges are available with crossover capacities to 60,000 pounds and platform leaf sizes to 8' wide by 20' long. Heavy-duty hydraulic cylinders assure safe and reliable bridge operation. The self-contained power unit with weatherproof cover is usually mounted on a shelf under the bridge, and easy-to-use wall-mount pushbutton controls are standard.