Series 35 scissors lift table is the most versatile and popular family of lifts. This family of hydraulic lifts can be used in a wide variety of applications - such as pallet build-up and tear-down, part assembly and disassembly and conveyor systems - to improve worker ergonomics or enhance plant efficiencies. The Series 35 lift table reduces worker fatigue and reduces the risk of back injuries. Series 35 hydraulic lifts offers a high quality, low cost lifting solution.

The Extra Wide line of hydraulic lift tables was developed to provide added stability and strength for those applications which demand high edge load ratings with platforms 48" to 72" wide. Regardless of whether the load is simply oversized, or if it is being rolled or dragged over the side of the scissors lift - the Extra Wide line of lift tables was specifically designed to provide a cost-effective solution to high edge loading applications.

The Extra Narrow line of lift tables was developed to provide a stable, high capacity scissors lift for applications where a smaller lift footprint is required. With standard widths as narrow as 16", the Extra Narrow line of hydraulic lifts maintains the high quality and performance characteristics of the rest of the Series 35 scissors lift family but was designed specifically to provide an economical scissors table solution for handling small, heavy loads - or when floor space or clearance with surrounding equipment is limited.

The versatile Series 35 line of scissors lifts is even more versatile when it becomes mobile. Now high capacity hydraulic lift tables can easily be moved to and shared among various workstations as required. Simply unlock the wheels and roll the scissors lift to any position required. 110 VAC battery charger is included.

The Double Wide hydraulic scissors lift models were developed to provide a low-travel, large platform solution - particularly for very wide loads or applications requiring extremely high end load ratings. Double Wide lift tables consist of two Series 35 hydraulic lifts, which have been mounted side by side and share a common base frame, platform, and hydraulic system. These scissors lifts provide a straightforward and economical solution to lifting applications which require platform widths up to 96" and load capacities up to 12,000 pounds.

The Double High scissors lift tables were developed to provide added vertical travel while minimizing footprint and platform sizes. Double High hydraulic lifts are basically two Series 35 lift tables which have been welded on top of each other with a shared hydraulic system. These hydraulic scissors lifts provide a straightforward and economical solution to lifting applications, which require vertical travels up to 96" and load capacities up to 7,000 pounds.

The Double Long hydraulic scissors lift tables were developed to provide a low-travel, large platform solution - particularly for very long loads or applications requiring extremely high side load ratings. Double Long lift tables consist of two Series 35 hydraulic lifts which have been mounted end to end and share a common base frame, platform, and hydraulic system. These lifts provide a straightforward and economical solution to lifting applications, which require platform lengths up to 162" and load capacities up to 12,000 pounds.

The Extra Long Double Wide hydraulic scissors lift models were developed to provide a low travel, very large platform solution with extremely high side load ratings. Extra Wide Double Long scissors lift tables consist of two Series 35 Extra Wide hydraulic lifts mounted end to end. This configuration provides lifting capability for long loads on platforms up to 162" long while providing added side stability and load capacities up to 12,000 pounds.

The Extra Long Double Wide hydraulic scissors lift models were developed to provide a low travel, very large platform solution with extremely high side load ratings. Extra Wide Double Long scissors lift tables consist of two Series 35 Extra Wide hydraulic lifts mounted end to end. This configuration provides lifting capability for long loads on platforms up to 162" long while providing added side stability and load capacities up to 12,000 pounds.

The Titan family of hydraulic scissors lift tables are designed to be the most robust design of the smaller scissors lifts, with low lowered heights and smaller platform sizes. This family of hydraulic lifts can be used in a wide variety of applications - such as sheet feeding in metal fabrication shops, and paper or metal coil handling. The Titan hydraulic scissors lifts have lowered heights of 7-1/2" and capacities to 12,000 lbs., with platform sizes as small as 24" x 36". Titan hydraulic scissors lifts also have slightly higher edge load ratings than the Series 35 lift family.

The low profile line of lift tables was developed to provide a scissors lift for applications where the lowered height of the lift was no more than 5". With standard widths as narrow as 24", the Low Profile line of hydraulic lifts maintains the high quality and performance characteristics of the rest of the Series 35 scissors lift family but was designed specifically to provide an economical scissors table solution for handling special applications or when clearance with surrounding equipment is limited.

Double pantograph standard family of lifts provide their operators with a high traveling, adjustable work platform with a travel range from 60" to 96" maximum. These units also utilize a minimum amount of floor space. This style of lift allows a standard platform size with a higher travel. This family of lifts incorporates the Autoquip Standard of Quality that is respected worldwide. They bring the work to the worker and increase a workstation's productivity.

Double pantograph special family of lifts provide their operators with a high traveling, adjustable work platform with a travel range from 36" to 144" maximum. These units also utilize a minimum amount of floor space. This style of lift allows a standard platform size with a higher travel. This family of lifts incorporates the Autoquip Standard of Quality that is respected worldwide. They bring the work to the worker and increase a workstation's productivity.

Double pantograph Q Lift family provides their operators with a high traveling, adjustable work platform with a travel range from 54" to 74" maximum. These units also utilize the smallest footprint and lowest lowered height of any double scissor lift on the market. This style of lift allows a standard platform size with a higher travel. This family of lifts incorporates the Autoquip Standard of Quality that is respected worldwide. They bring the work to the worker and increase a workstation's productivity.

The XLR family of hydraulic scissors lifts has the industry's lowest reach-over of 4", providing easy operator access to pallets and loads being built-up or broken-down over the side of the scissors lift. The low reach-over also provides the smallest footprint in the industry for pan lifts. The XLR scissors lifts have platform sizes to meet all common load cube sizes.

The Super Titan scissors lift family of hydraulic scissors lifts is designed for those applications that require the highest lifting capacity and/or highest side and end load capacities. With capacities from 6,000 lbs. to 68,000 lbs. and travel from 24" to 120", this family is the heavy weight of hydraulic scissors lifts. Typical industrial applications would include handling heavy eccentric loads such as steel coils, paper rolls, sheet metal stampings, and dies. The large axle or edge loading capacities allow movement of heavy loads with the stability otherwise impossible with "beefed-up" smaller lift tables.

The Super Titan Double Long hydraulic scissors lift tables were developed to provide a high capacity, long platform solution - particularly for very long loads or applications requiring extremely high side load or axle load ratings. Double Long lift tables consist of two Super Titan hydraulic lifts which have been mounted end to end and share a common base frame, platform, and hydraulic system. These lifts provide a safe and dependable solution to material handling applications, which require platform lengths up to 420" and load capacities up to 68,000 pounds.

The Super Titan Double Wide hydraulic scissors lift models were developed to provide a high capacity, wide platform solution - particularly for applications requiring extremely high end load or axle load ratings. Double Wide lift tables consist of two Super Titan hydraulic lifts, which have been mounted side by side and share a common base frame, platform, and hydraulic system. These hydraulic scissors lifts provide a safe and dependable solution to material handling applications which require platform widths up to 96" and lifting capacities up to 68,000 pounds.

The Super Titan Quadruple hydraulic scissors lift models were developed to provide the very largest platform solution along with the highest possible lifting capacities, and side and end load ratings. Quadruple or "Quad", hydraulic scissors lift tables consist of four hydraulic lifts, two wide by two deep, which share a common base frame, platform, and hydraulic system. This configuration provides for lifting capacities up to 150,000 pounds and the capability for long and wide loads, up to 96" x 420".

The PLTC Dock Lift family is the most popular and versatile family of hydraulic scissors dock lifts. This family of medium to heavy capacity scissors lifts can be used in a wide variety of pit mounted or surface mounted applications - such as loading & unloading trucks, moving fork trucks or other wheeled loads between levels, and large part assembly or disassembly - to improve work flow at the dock or inside the plant. These lifts provide travels to 60", capacities to 10,000 lbs., and are equipped with handrails, hinged bridge, and remotely located hydraulic power unit.

The TSL Pit Mounted Dock Lift family is a robust and versatile family of heavy- duty hydraulic scissors dock lifts. This family of heavy capacity scissors lifts can be used in conjunction with dock systems, or alone - such as loading & unloading trucks, moving fork trucks or other wheeled loads between levels, and large part assembly or disassembly - to improve work flow at the dock or inside the plant. The TSL Dock Scissors Lifts provide travels to 60", capacities to 20,000 lbs., and are equipped with handrails, hinged bridge, and remotely located hydraulic power unit. Because these heavy-duty dock scissors lifts are capable of high end and side load capacities, typical applications would include; air cargo containers, paper rolls, steel coils, and fork trucks.

The PLD Dock Scissors Lift family is a stationary, low to medium capacity surface mounted hydraulic scissors lifts, which have a low profile of 6" to 6-1/2". These scissors lifts are designed especially for situations where no dock exists. Because the PLD Surface Mount Dock Lifts are not installed in a pit, these hydraulic scissors lifts can be relocated easily should dock locations or requirements change. The PLD Dock Scissors Lifts provide through-loading only (no 90 degree load patterns) in travels to 55-1/2", capacities to 5,000 lbs., and are equipped with handrails, (1) hinged bridge per end, and self-contained or remotely located hydraulic power unit.

The PDQ Dock Scissors Lift series of hydraulic scissors lifts are portable, medium capacity surface mounted lifts with a very low 4-1/2" profile. The PDQ Dock Scissors Lifts are rated to 6,000 lb. capacity and are designed for high volume, through-loading applications especially in areas where no dock exists. The integrated approach ramp allows the rolling of loads to or from ground level, and a throw-over bridge on the opposite end of the platform helps to transition the load to or from an elevated loading surface such as a dock or truck. These PDQ lifts come with a dolly handle, which is used to move an empty lift manually to any location in the dock or parking lot area. Quick-disconnect, single-phase electrical connections allow the hydraulic power unit to be plugged into any convenient receptacle with adequate service rating.

The CMD Dock Scissors Lift family of hydraulic dock lifts are portable, low capacity surface mounted lift with a very low 4-1/2" profile. CMD Dock Scissors Lifts have three open platform sides, which are designed to be configured to mount any combination and orientation of approach ramp, throw-over bridge, or handrail. These CMD lifts come with a dolly handle, which is used to move an empty lift manually to any location in the dock or parking lot area. Quick-disconnect, single-phase electrical connections allow the hydraulic power unit to be plugged into any convenient receptacle with adequate service rating. Typical load transfer applications for these 3,000 & 4,000 lb. capacity dock lifts include; laundry carts, wheeled postal carts, carts serving retail outlets, pallet jacks and hand dollies.

The Autoquip Carousel Picking Lift is a hydraulic scissors lift that provides order picking productivity by positioning the operator to the appropriate height to effectively pick parts and products from horizontal carousel systems. The Carousel hydraulic Lift offers the practical solution to applications as parts picking, inventory management and carousel system integration in typical markets including warehouse systems, light manufacturing, assembly and parts sales. The Carousel Picking hydraulic scissors lift offer customizable platform shapes with wings to service up to 4 horizontal carousel systems. Standard features include a slip-resistant grit platform surface, 48" high handrails with snap chains at pick openings, operator access gate, duplex outlet and operator pushbutton mounted on lift platform.

Coil Transfer Cars eliminate the need for overhead cranes or fork trucks to safely carry out coil-to-mandrel transfers and coil staging by utilizing carts with powered traverse drives, with or without a hydraulic lift mounted to the cart - depending on the application. Coil Transfer Cars can be equipped with turntables for rotating the coil, polyurethane lined platform, "V" deck with or without snub rollers, hydraulic kick off mechanism for unloading, or a "coil present" switch to recognize when the coil is in position on the cart deck. Coil Transfer Cars are designed to move the load in the raised position if required.

The Freightlite VRC family of hydraulic material lifts are the most popular of the hydraulic designs, capable of moving materials weighing up to 3,000 pounds between two elevations that are up to 14 feet apart - typically to and from a mezzanine. Because the cantilevered carriage is raised and lowered in the guides by a pair of direct-acting hydraulic cylinders, the hydraulic Freightlites are the only models that ship completely pre-assembled, have few moving parts (no cables or chains), and are easy to install and operate. Other features of the Autoquip hydraulic Freightlite material lifts include unrestricted load height, hydraulic velocity fuses, overload protection, and zero drift. Typical applications are edge of mezzanine material transfer, freight elevator replacement, auto dealer shops, restaurant delivery, retail stores, warehousing, and packaging and distribution. "C", "Z", and "90 degree" load patterns are available with the Freightlite hydraulic VRC lift.

The Cantilever VRC hydraulic Freightlifts are designed to move materials weighing up to 6,000 pounds between two elevations that are up to 28 feet apart - typically to and from a mezzanine. Autoquip hydraulic Cantilever material lifts raise and lower the carriage in two guide beams by means of two vertical hydraulic cylinders which pull heavy industrial cable (minimum safety factor of 6 to 1) over a series of 12" diameter sheaves which are mounted overhead. Safety features of these hydraulic VRC's include hydraulic velocity fuses, overload protection, zero drift, and two safety locking cams for free-fall arrest in the unlikely event of a cable or swage failure. Typical applications are edge of mezzanine, freight elevator replacement, conveyor systems, explosion-proof environments, warehousing, retail storage and movement of goods, and packaging and distribution. "C", "Z" and "90 degree" load patterns are available with the Cantilever hydraulic VRC lifts.

The Straddle VRC hydraulic Freightlifts are designed to move materials weighing up to 6,000 pounds between two elevations that are up to 28 feet apart - typically to and from a mezzanine. Autoquip hydraulic Straddle material lifts raise and lower the carriage in two guide beams by means of two vertical hydraulic cylinders which pull heavy industrial cable (minimum safety factor of 6 to 1) over a series of 12" diameter sheaves which are mounted overhead. Safety features of these hydraulic VRC's include hydraulic velocity fuses, overload protection, zero drift, and two safety locking cams for free-fall arrest in the unlikely event of a cable or swage failure. Typical applications are edge of mezzanine, freight elevator replacement, conveyor systems, warehousing, explosion-proof environments, retail storage and movement of goods, and packaging and distribution. "C" and "Z" load patterns are available (no 90 degree load patterns) with the hydraulic Straddle Freightlifts.

Autoquip Single Ram Lifts can efficiently raise loads to 30,000 pounds, and have platforms to 120", with high axle loading over the sides, and travels to 28'. The Vertical Ram Lifts require a pit and usually become permanent installations. Autoquip manufactures the steel ram plunger to a mirror-finish, with each bearing being fitted individually to the ram, providing a wear-proof and close precision tolerance, along with the exclusive fluid prison seal which keeps the ram oil tight at zero or maximum working pressures. Typical users of Single Ram Lifts would be machining and manufacturing plants, air cargo terminals, utility depots, food product manufacturers and processors.

Autoquip Dual Ram Lifts can efficiently raise loads to 200,000 pounds and have platforms to 16' by 40' with high axle loading over the sides, and travels to 28'. The Dual Vertical Rams are equalized by cables and sheaves, rack and pinion, or structurally equalized. The Dual Vertical Ram Lifts require a pit and usually become permanent installations. Autoquip manufactures the steel ram plunger to a mirror-finish, with each bearing being fitted individually to the ram, providing a wear-proof and close precision tolerance, along with the exclusive fluid prison seal which keeps the ram oil tight at zero or maximum working pressures. Typical applications of Dual Ram Lifts would be in machining and manufacturing plants, the handling multiple air cargo containers, utility storage facilities, entertainment and stage lift, lifting rail cars or aircraft for servicing.

Autoquip Surface Mounted Truck Levelers provide a superior solution to getting delivery vehicles loaded and unloaded quicker and safer by bringing the truck bed closer to or equal to the dock level. By leveling the truck or trailer to the dock, there is little incline for the wheeled load to overcome. The Surface Mounted hydraulic Truck Leveler is suited for above ground installation having a low profile height of 5". Because the Surface Mounted Truck Levelers are not installed in a pit, these hydraulic lifts can be relocated easily and inexpensively should dock locations or requirements change. Travel of the hydraulic Surface Mounted Truck Levelers is 30", with lifting capacities to 60,000 pounds. The Surface Mounted Truck Leveler is normally installed outdoors, in front of a dock or loading area, and is equipped with an approach ramp.

Autoquip Pit Mounted Truck Levelers provide a superior solution to getting delivery vehicles loaded and unloaded quicker and safer by bringing the truck bed closer to or equal to the dock level. By leveling the truck or trailer to the dock, there is little incline for the wheeled load to overcome. The Pit Mounted version of the hydraulic Truck Leveler is for recessed installation, allowing the platform to travel above or below the grade to accommodate a wider variety of truck bed heights. Travel of the hydraulic Pit Mounted Truck Levelers can be configured in many above and below grade combinations totaling 30", with lifting capacities to 60,000 pounds. The Pit Mounted Truck Leveler is normally installed outdoors, in front of a dock or loading area, and permits vehicular cross traffic in alleyways or in tight turning areas when the lift is not in use.

The Ground Level Truck Levelers provide a superior solution to getting delivery vehicles loaded and unloaded quicker and safer by bringing the truck bed closer to or equal to the dock level. By leveling the truck or trailer to the dock, there is little incline for the wheeled load to overcome. The Ground Level version of the hydraulic Truck Leveler is an extremely low profile surface mounted lift with only 2-1/4" of deck height in order to level the widest variety of truck bed heights possible. Because the Ground Level Truck Levelers are not installed in a pit, these hydraulic lifts can be relocated easily and inexpensively should dock locations or requirements change. Travel of the Autoquip Ground Level Truck levelers is 30", with lifting capacities to 60,000 pounds and is equipped with a approach ramp.

Autoquip Single Leaf Bascule Bridges are hydraulically operated and can be raised to full vertical position when not in use, eliminating the possibility of interference with rail or other traffic. Single Leaf Bascule Bridges are available with crossover capacities to 60,000 pounds and platform leaf sizes to 8' wide by 20' long. Heavy-duty hydraulic cylinders assure safe and reliable bridge operation. The self-contained power unit with weatherproof cover is usually mounted on a shelf under the bridge, and easy-to-use wall-mount pushbutton controls are standard.

Autoquip Double Leaf Bascule Bridges are hydraulically operated and can be raised to full vertical position when not in use, eliminating the possibility of interference with rail or other traffic. Double Leaf Hydraulic Bascule Bridges allow for longer spans crossing two or more rail tracks, or to accommodate low overhead clearance, and double wide, permitting two-way traffic across the leaves. Double Leaf Bascule Bridges are available with crossover capacities to 60,000 pounds and can traverse spans of 40'. Double Wide bridges can have leaves to 16' wide. Heavy-duty hydraulic cylinders assure safe and reliable bridge operation. Individual self-contained power units with weatherproof cover, usually mounted on a shelf under the bridges, and easy-to-use wall-mount pushbutton controls are provided for each leaf as standard.