need help? 877-360-6777
Home / Products / Tilters / 90 Degree Tilter
Warranty

// 90 Degree Tilter

90 Degrees of Powered Tilting: Simple, Safe and Reliable

Autoquip's 90 degree hydraulic tilters are used for process improvements such as re-orientating small loads or palletizing/de-palletizing, or for ergonomic purposes such as bringing hard-to-reach objects where they are needed, within easy reach of the worker in applications such as small parts handling (in bins and baskets).

Autoquip's 90 degree tilters utilize double acting hydraulic cylinders to rotate, then return, a load or container through a 90 degree travel at a controlled rate of speed. The hydraulic power unit is located inside the tilter base frame, or can be remotely located. 

Features and Benefits

Durability and Quality

  • Joints, the most critical wear points in the lift, feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
  • Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and greatly extends the life of the platform deck.
  • Steel support in upper and lower frames provide additional structural rigidity and resistance to twisting and bending of the tilter under load.
  • Chrome-plated rods improve durability and extend the life of the cylinders and seals.


Maintenance and Warranty

  • Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable tilter.
  • Maintenance-free bearings at pivot points require no lubrication.
  • On-board maintenance devices enable maintenance crews to safely and effectively block open the tilter during inspection and routine maintenance.
  • Sturdy, semi-transparent polyurethane oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
  • Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.


Simplicity

  • Tilters keep work within the ergonomic "power zone" and reduce fatigue and back injury by minimizing reaching and bending while loading and unloading bins and baskets.
  • Standard controls are prewired and drive unit is already onboard. Installation only requires the tilter to be lagged to the ground and connected to electricity.
  • Exceptionally low lowered height allows greater on and off load flexibility.
  • Low collapsed height increases its total ergonomic range


Safety

  • Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
  • Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
  • Compliance with recognized standards:
    • ANSI MH29.1 - Safety Requirements for Industrial Scissors Lifts
    • NFPA 70 - National Electric Code
    • ASTM - A36 - Structural Steel Standard
    • ANSI Z535 - Safety Labeling Requirements
    • AWS D.1 - Welding Standards
    • Applicable portions of OSHA 29CFR1910 - General workplace safety

With the largest selection of lifts, Autoquip can provide you with the lift you need. To request a quotation please click here.

Terms of Use    Privacy Statement    Site Map

© Autoquip Corporation. All rights reserved. If you have a special requirement, contact Autoquip at sales@autoquip.com or call toll-free 877-360-6777.